Filter
Top Products
Page 3
Using the Operation Panel
The operation panel consists of the main switch and three indicator lights.
See Figure 4.
Figure 4. Operation panel
Main Switch Functions
Power ON: Push once while the printer is OFF.
Power OFF: Push twice quickly.
Manual Form Feed: With power ON and paper inserted, press and hold the main
switch to feed (or eject) paper. In order to assure that printing is complete before
permitting a form feed, manual form feeds cannot be performed for fi ve seconds after
the printer has received any data. The button must then be held down for 1-1/2 seconds
to start the form feed.
Charge the Battery: With the printer off, push the main switch and hold it down
for two or more seconds until the POWER indicator begins to blink. The POWER
indicator light continues to blink until charging is complete.
To Power Off During Charge Mode: Push the main switch twice quickly (same as
when in normal operating mode).
Service Mode: After powering the unit on, press and hold for 2 seconds until the
DATA LED turns red. In this mode you may initiate self test printing (See Chapter 5)
or head cleaning (See Chapter 4).