Brother PT-2110 Printer User Manual


 
INTRODUCTION
10
General Precautions
Do not use the P-touch labeler in any way or for any purpose not described in this guide.
Doing so may result in accidents or damage the machine.
Use only Brother TZ tapes with this machine. Do not use tapes that do not have the
mark.
Do not pull or press on the tape in the cassette.
Do not put any foreign objects into the tape exit slot, AC adapter connector, or USB port,
etc.
Do not try to print labels using an empty tape cassette or without a tape cassette set in the
P-touch labeler. Doing so will damage the print head.
Do not touch the print head with your fingers.
Do not clean the machine with alcohol or other organic solvents. Only use a soft, dry cloth.
Do not place the P-touch labeler in direct sunlight, near heaters or other hot appliances,
in any location exposed to extremely high or low temperatures, high humidity, or dusty
locations. Standard operating temperature range: 50
°
F to 95
°
F.
It is recommended that you use the USB cable supplied with the P-touch labeler. (USB
cable not included with the purchase of PT-2100.) Should another USB cable need to be
used, ensure it is of high quality construction.
Be careful not to scratch the CD-ROM. Do not place the CD-ROM in any location exposed
to high or low temperatures. Do not place heavy objects on the CD-ROM or bend it.
The software on the CD-ROM is intended for use with the P-touch labeler and may be
installed on more than one PC.
We strongly recommend that you read this User’s Guide carefully before using your
P-touch labeler, and then keep it nearby for future reference.
The following symbols are used throughout this guide to indicate additional information.
General Precautions
Symbols Used in this Guide
:
This symbol indicates information or directions that may result in damage or
injury if ignored, or operations that will result in errors.
:
This symbol indicates information or directions that may help you understand
and use the P-touch labeler more efficiently.