Brother PT-2110 Printer User Manual


 
49
Label Preview
1
2
3
4
5
6
7
8
9
z LABEL PRINTING
LABEL PRINTING
Using the Preview function you can check the layout of the label before printing it onto
the label.
Press the key.
An image of the label is displayed on the screen.
The length of the label is shown in the lower-right
corner of the screen.
Press the or keys to scroll the preview to the left
or right.
Press the or keys to change the magnification of the preview.
After entering the text and formatting the label, you are ready to print your label. In
addition to printing a single copy of a label, your P-touch labeler has several printing
features that allow you to print multiple copies of a label, sequentially numbered labels
and mirror-printed labels.
Label Preview
1
Press the key to return to the text entry screen. (You can also return to the text entry screen
by pressing , or key.)
To scroll the preview to the left or right end, hold down the
key and press the or
keys.
To print the label directly from the preview screen, press the key or open the print
options screen and select a print option. Refer to "Printing a Label" below for details.
The print preview is a generated image of the label, and may differ from the actual label when
printed.
Printing a Label
Do not pull the label coming out of the tape exit slot. Doing so will cause the ink ribbon
to be discharged with the tape.
Do not block the tape exit slot during printing or when feeding tape. Doing so will cause the
tape to jam.
Be sure to check that there is enough tape remaining when printing several labels
continuously. If tape is running low, set fewer copies, print labels one at a time, or replace the
tape cassette.
Striped tape indicates the end of the tape cassette. If this appears during printing, press the
key to turn the P-touch labeler off. Attempting to print with an empty tape cassette may
damage the machine.