Brother PT-9200 Label Maker User Manual


 
17
8 If Replace with new Brother PT-9200DX or Add
Brother PT-9200DX was selected:
With Windows
®
98/98SE/Me/2000 Professional
:
A dialogue box appears, instructing you to connect
the PT-9200DX to the computer.
Connect the PT-9200DX to the computer using the
enclosed USB interface cable as described on page 5,
and then turn on the PT-9200DX. A dialogue box
appears, showing that the printer driver has been
installed.
Select Yes, restart immediately., and then click the
Finish button to restart the computer.
With Windows
®
XP:
In the first Found New Hardware Wizard dialog box
that appears, select Install the software automatically
(Recommended), and then click the Next button.
If the dialog box warning appears indicating the
software has not passed Windows Logo testing,
simply continue with the installation.
In the Found New Hardware Wizard dialog box that
appears, indicating that installation of the PT-9200DX
and the Found New Hardware Wizard are finished,
click the Finish button.
If the dialog box warning that the software has not
passed Windows Logo testing appears again, click the
Continue Anyway button to continue with the
installation (since this printer driver has already
cleared strict product quality standards of our testing).
In the dialog box that appears, indicating that installa-
tion is finished, select Yes, restart immediately., and
then click the Finish button. The computer is restarted.
Remove the CD-ROM from the computer.