Filter
Top Products
27
Maintenance
Cleaning the Print Head and Roller
A blank horizontal line appearing through the printed label indicates that the print head and roller are dirty. Clean the print
head and roller according to the following procedure.
1 Turn off the PT-9200DX.
2 Open the tape compartment cover.
3 Remove the tape cassette if one is installed.
4 Use a dry cotton swab to gently wipe up and down along the print head and roller.
Cotton swab
Print head (area to
be cleaned)
Cotton swab
Roller (area to be
cleaned)
5 Insert the tape cassette, and then close the tape compartment cover.
Caution: Be careful not to touch the cutter near the print head and roller while cleaning them.
In addition, do not try to clean the print head immediately after printing, otherwise you may be burned.
* Cleaning can also be done by using the optional print head cleaning cassette (TZ-CL6).