Brother PT-E500 Label Maker User Manual


 
GETTING STARTED
26
Power Supply
Rechargeable Li-ion Battery
P-touch Labeling System
Charging current: 500 mA
Charging voltage: up to 8.2 V (Maximum)
Rechargeable Li-ion Battery Characteristics
Understanding the properties of the rechargeable Li-ion battery will allow you to optimize its
usage.
Using or storing the rechargeable Li-ion battery in a location exposed to high or low
temperatures may accelerate its deterioration. In particular, using a rechargeable Li-ion battery
with a high charge (90% or more) in a location exposed to high temperatures will considerably
accelerate battery deterioration.
Using the P-touch labeling system while the rechargeable Li-ion battery is installed and
charging may accelerate the battery's deterioration. If using the P-touch labeling system when
the rechargeable Li-ion battery is installed, disconnect the AC adapter.
• If the P-touch labeling system will not be used for longer than one month, remove the
rechargeable Li-ion battery from the P-touch labeling system, and then store the battery in a cool
place away from direct sunlight.
If the rechargeable Li-ion battery will not be used for a long period of time, we recommend
charging it every 6 months.
If you touch a part of the P-touch labeling system while the Li-ion battery is charging, that part
of the P-touch labeling system may feel warm. This is normal, and the P-touch labeling system
may be used safely. If the P-touch labeling system becomes extremely hot, discontinue use.
Specifications
• Charging time: Approximately 6 hours when charged by an AC adapter (AD-E001).
Nominal Voltage: DC 7.2 V
Nominal Capacity: 1850 mAh
Surroundings temperature range
Charge 104°F/40°C
Standard discharge current 1.9 A 140°F/60°C
Maximum discharge current 2.5 A 140°F/60°C
Shipped battery
Less than 1 month -4°F - 122°F/-20°C - 50°C
Less than 3 month -4°F - 104°F/-20°C - 40°C
Less than 1 year -4°F - 68°F/-20°C - 20°C
Charging Parameters
Maximum charging voltage 8.2 Vdc
Maximum charging current 1330 mA