Filter
Top Products
Appendix
Potential types of problems
42
IntroductionCreating Labels
•
The printed barcode
cannot be read.
•
Depending on the type of the
scanner, it cannot be read. Use
different scanner. We recommend
to print the barcode with print
setting as Give priority to quality.
Also, set the label vertical to the
print head as shown right.
• I want to reset the printer/
delete the data
transferred from PC.
• To reset the printer, turn OFF the printer. Press ON/OFF button and CUT
button six times. All the transferred data from PC will be deleted and reset the
machine to factory setting.
• I want to cancel the
current printing job.
• Make sure that the printer is ON, and press ON/OFF button.
•
When printing via the USB
cable, the printer
repeatedly pauses and
then continues printing.
• Is the printer set for sequential printing?
If so, set print mode to buffered printing.
(Open printer properties from [Control
Panel]-[Printer and FAX] and click [Printing
Preferences...] button in the [General] tab.
Choose the option "After one page of data
is received".)
• An alternative solution is to disconnect the
LAN cable until USB printing is completed.
Problem Solution
Label
Print
head
Recom-
mended
print
direction