Filter
Top Products
IntroductionCreating LabelsAppendix
Available Commands
32
Appendix
Fonts and several bar codes are embedded within this machine. You can send commands to print embedded
characters and barcodes.
Available Commands
Commands available are P-touch proprietary commands based on ESC/P.
For details, see the "Command Reference" included in the CD-ROM.
([CD Drive]:\Doc\Technical)
Serial Cables
The pin assignments for the serial cables (RS-232C cables) which can be used with this machine are shown
in the table below. You can purchase the cables at an electronics store. Do not use an interface cable that is
longer than 6 feet (2.0 meters).
Brother QL-1060N side PC side
(D-sub female, lock screw #4-40 inch screw) (D-Sub9P female)
Controlling with the ESC/P Commands
The RS-232C serial connector part of this equipment is not Limited Power Source.
Signal
Name
Pin
Number
Pin Assignments
Pin
Number
Signal
Name
DCD 1 1 DCD
RXD 2 2 RXD
TXD 3 3 TXD
DTR 4 4 DTR
GND 5 5 GND
DSR 6 6 DSR
RTS 7 7 RTS
CTS 8 8 CTS
RI 9 9 RI