Filter
Top Products
7
Before using your machine
Warning
Tape Cutter
• To avoid injury, do not touch the tape cutter.
Labels
• Depending on the location, material, and environmental conditions, the label may be
difficult to remove, the colour of the label may change or may be transferred to other
objects. Test the suitability of the surface first by affixing a small piece of the label to
an inconspicuous area of the intended surface.
Installation precautions
Caution
• Do not place the machine on an unstable cart, stand, or table. The product may fall,
causing serious damage to the product.
• To avoid damage, do not place any heavy objects on top of the printer.
• Do not bring RFID (non-contact RFID tags) within 50 mm in front of, above, or on the
right side of the printer when the printer is in use. If you do so, it may interfere with the
data writing during printing. Even beyond this range, some types of RFID tags may
interfere with writing. Be extremely careful when using high-sensitivity RFID tags.
• Do not place the printer within the read range of other RFID reader/writers.
• The printer is a communication device using 13.56 MHz radio waves on the ISM band.
It may generate interference, depending on how and where the printer is used. To
minimize the effect of any interference, we recommend checking interference by or to
the printer in advance. Be extremely careful when you use it near radio astronomy or
medical equipment, as the printer may affect operation of the equipment.