Filter
Top Products
24
PCATX-R9 User’s Guide
Adding Components
Next you need to adjust the hold-down clamps and reinstall the card stabi-
lizer. The plastic hold-down clamps are designed to securely hold down
your add-on cards in their slots. The plastic clamps can be adjusted to
accommodate add-on cards of different height. Follow these steps to finish
installing your add-on card:
1. Locate the clamp that will be positioned directly above the add-on
card.
2. The clamps are secured in their metal brackets. Loosen the screw so
that the plastic clamp can slide freely inside the metal bracket.
3. With the clamp still free to move up and down, reinstall the metal
stabilizer bar.
Figure 3.4
Loosen the screw so that the plastic
hold-down clamp can be adjusted for
different add-on card height.
Loosen this screw to adjust
clamp height.