Filter
Top Products
6
7
STANDARD SETTINGS
3.
1
Introduction
Setting up the AirStation parameters us-
ing Buffalo’s utility tool, Client Manager,
requires basic wireless con guration
knowledge. Setup includes manual wire-
less con guration and basic administra-
tive management.
For explanation of each parameter and
its use, see Chapter 4.
3.2 Setup Preparation
Make note of the WBR-G54’s wired MAC
address (found on the back of the WBR-
G54). It is also recommended you record
any other broadband access information
such as global IP address, subnet mask
address, default gateway address, DNS
server address and PPPoE parameters.
3.3 Setup Overview
The WBR-G54 CD contains the Client
Manager program. The Client Manager is
used for setting up and con guring the
access point and for monitoring the wire-
less signal between the AP and client.
Specialized setups for security, ltering
and other features will be explained in
later sections.
3.4 Open the Setup Screen
• Connect the WBR-G54 according to the
wiring instructions.
(Install the setup utility, Client Manager,
from the CD.
• The WBR-G54 has a default LAN IP ad-
dress of 192.168.11.1 and Subnet Mask
of 255.255.255.0.
Ex: The setting PC can use 192.168.11.2
as an IP and 255.255.255.0 as the Subnet
Mask during setup unless a different IP
range is entered for the AirStation.
1. Click Start and select Programs
4AirStation Utility4Client Man ag er
2. Select Edit4Search AirStation to nd
the nearest AirStation.
3. Highlight the WBR-G54, click the
Admin menu button, then the Con g-
ure AirStation tab to open the setup
screen.
4. The AirStation log-in screen will appear.
5. Enter “root” for User Name and leave
Password blank
3.5 Input Parameters Through
the Client Manager
• Click the appropriate button to select
the type of broadband access. (Users
more experienced in networking may
choose to select the Advanced button
and skip to Chapter 4.)
• For supplementary tools, use the tabs
along the top of the screen.
Fig ure 3.5
Initial
Settings
Screen