Filter
Top Products
15
Open: Open the COM port after scan to establish the connection between PC and the matrix.
Close: Release the COM port after scan.
Quick Setup Buttons: Provide the fast setup between inputs and outputs of the matrix. “Default” button
makes input 1, 2, 3, 4 mapped to output 1, 2, 3, 4 respectively. “Channel 1” makes all outputs see
input-1, same for the remaining buttons.
Output Channel Setup: Click on this button, a quick selection table of inputs will show up. Users can
therefore easily select the input video for each output.
Input Channel Setup: The button will bring up the setup window for the inputs as below.
Input Channel: Select the input channel to do bitmap and label change.
Bitmap Path: Select the figure for each channel. Notice that only pictures in BMP format are supported.
Description: Channel description.
2
3
4
5
6
A
B
C
A
B
C