Cable Electronics HSW44C Switch User Manual


 
4
PCB stack-up 4-layer board [impedance control — differential 100; single 50]
Input
4x HDMI
1x RS-232
1x RJ-45 TMDS
1x RJ-45 DDC
1x IR socket for IR receiver
Output
4x RJ-45 TMDS
4x RJ-45 DDC
5x IR socket for IR emitter
1x HDMI
HDMI I
nput selection
Push button / IR remote / RS
-
232
Push button / IR remote
HDMI source control Controllable through IR control path from IR receiver at receiver sites
IR remote control
Electro
-
optical characteristics:
τ
= 25
°
/ Carrier frequency: 38kHz
HDMI connector Type A [19-pin female]
RJ
-
45 connector
WE/SS 8P8C with 2 LED indicators [TMDS & DDC channels]
RS-232 connector DE-9 [9-pin D-sub female]
3.5mm connector
Earphone jack for IR emitter cable
[IR Main] All sources IR control
[IR1~IR4] Individual channel IR control
Earphone jack for IR receiver cable
[IR] Receives IR control
DIP switch
[for MA
-
5144 only]
[SW1~SW4] 2-pin for EDID, audio mode & safe mode
[SW Main]
4
-
pin o
peration
mode
& firmware update
Mechanical
HSW44C
HSMR
Housing
Metal
case
Dimensions
(L x W x H)
Model 1’1.4”x4.3”x1.7” [340 x 110 x 44mm] 3.3”x3.5”x1” [85 x 90 x 25mm]
Package
1’9.5”x9.1”x4.3”
[
545 x 230 x 110mm
]
Carton 1’10.5”x1’10.9”x10.2” [570 x 580 x 260mm]
Weight
Model
2.7
lbs
[
1220
g
]
6.3 oz
[
180g
]
Package
7.0 lbs [3.2 kg]
Fixedness
1U rack-mount with ears
Wall hanging holes
Wall-mount with screws
Power supply 5V 6A DC
Not necessarily required
1
Power consumption
20 Watts [max]
1 Watt [max] (provided by
HSW
44
C
)
Operation temperature
0~40°C [32~104°F]
Storage temperature -20~60°C [-4~140°F]
Relative humidity
20~90% RH [no condensation]
Package Contents
1x HSW44C
1x IR emitter cable
2
2x Rack-mounting ears
1x IR remote
2
1x User Manual
4x HSMR
4x IR receiver cable
8x Wall-mounting screws
1x 5V 6A power adapter
1
11
1
The HSMR has been tested extensively and found that it doesn’t require external power supply.
If in rare situation you find it cannot work with the HSW44C, please use any +5V power
adapter to plug in the power jack and see if it can work. If not, please contact your technical
support for further service.
2
22
2
Additional IR remote control and IR emitter cable can be purchased as optional accessories to
control the HDMI sources located separately.