![](http://pdfasset.owneriq.net/6/61/661103d4-3cb8-4ae8-add0-dda876ac40df/661103d4-3cb8-4ae8-add0-dda876ac40df-bg6c.png)
Configuring Duplex Modes 5-27
Bridging
To configure the Duplex Mode for any standard Ethernet interface:
1. In the Duplex Modes window, highlight the interface whose Duplex Mode you
wish to change. Note that only one interface can be selected at a time.
2. Double-click the selected interface to toggle the Full Duplex setting from ON
to OFF, or vice versa. The set will take place immediately.