Filter
Top Products
The 9H42x-xx Module View
2-14 Viewing Module Information
Host interfaces and the backplane INB interface), and ethernet-csmacd (for both
standard and Fast Ethernet front panel interfaces, and the backplane SMB 10
management interface).
Description
A text description of the interface: SMB 1 and SMB 10 (for the MMAC-Plus
backplane management interfaces); Host (for the module’s two internal host
interfaces); INB (for the INB backplane interface), and Ethernet (for both
standard and Fast Ethernet front panel interfaces).
P. Sta
Displays the current physical status — or operational state — of the interface:
Online or Offline.
L. Sta
Displays the current logical status — or administrative state — of the interface:
Up or Down.
Interface Performance Statistics/Bar Graphs
The statistical values and accompanying bar graphs to the right of the interface
description fields provide a quick summary of interface performance. You can
select the statistical value you want to display and the units in which you want
those values displayed by using the two menu buttons directly above the graphs,
as follows:
1. Click on the right menu button to select the unit in which you wish to display
the selected statistic: , , or .
2. Once you have selected the base units, click on the left menu button to
specify the statistic you’d like to display. (The options from this menu will vary
depending on the base units you have selected.)
After you select a new display mode, the statistics and graphs will refresh to
reflect the current choice, as described below.
Raw Counts
The total count of network traffic received or transmitted on the indicated
interface since device counters were last reset. Raw counts are provided for the
following parameters:
In Octets Octets received on the interface, including framing
characters.
NOTE
Bar graphs are only available when Load is the selected base unit.