Cabletron Systems ESX-1320 Switch User Manual


 
Chapter 3: Installation
3-12 ESX-1320/ESX-1380 Installation Guide
3.6 BRIM CONNECTION
Figure 3-8 shows the location of the Bridge/Router Interface Module
(BRIM) connector on the ESX board. Refer to the BRIM Guide for
installation procedures and additional information.
Figure 3-8 BRIM Connector Location
3.7 INSTALLING THE ESX
The ESX may be installed on a tabletop, shelf, or in a 19-inch rack. Refer
to Section 3.7.1 for information concerning a tabletop or shelf
installation. Section 3.7.2 describes the rackmount installation.
To prevent possible personal injury and/or damage to the unit,
do NOT connect power to the ESX until instructed to do so.
ESX Front Panel
ESX TOP VIEW WITHOUT COVER
BRIM
1574-28
BRIM Connector