Filter
Top Products
REQUIREMENTS/SPECIFICATIONS
Page 2-15
TPIM-F3
The TPIM-F3 shown in Figure 2-7 is an ST connector that supports
Single Mode fiber Optic cabling.
Figure 2-7. The TPIM-F3
Note: Transmitter Power decreases as temperatures rise and increases
as temperatures fall. Use the Output Power Coefficient to calculate
increased or decreased power output for your operating environment.
For example, the typical power output at 25
°
C is -16.4 dBm. For a 4
°
C
temperature increase, multiply the typical coefficient
(-0.15 dBm) by four and add the result to typical output power
(4 x -0.15 dBm + -16.4 = -17.0).
TPIM-F3
LNK
RX
TX
Receive
Sensitivity
dBm
Less Power
More Power
-40 -35 -30 -25 -20 -15 -10 -5 0
Maximum
Receive
Input Power
Transmitter Power*
(At 25°C into
8.3/125µm fiber)
Minimum Sensitivity (-30.0)
Typical Sensitivity (-31.0)
Maximum Sensitivity (-36.0)
Maximum Receive Input (-6.99)
Typical Receive Input (-7.5)
Minimum Receive Input (-9.72)
Maximum Transmit Power (-12.0)
Typical Transmit Power (-15.5)
Minimum Transmit Power (-21.0)
* Transmit Power Typical Power Minimum Power Maximum Power
Coefficient
(See Note Below)-0.15dBm/ °C -0.12 dBm/ °C-0.18 dBm/ °
C