Filter
Top Products
6-4 Sending Documents Chapter 6
LASER CLASS 3170 Series.
CFYA/YAH/YAN 120v US V1.0
4.
Make sure the document is below the load limit marks for A4/
LTR and B4/LGL sizes.
5.
Insert the document fully into the fax until the leading edge of the
document stops in the ADF.
The fax will display some messages.
MEMORY IN USE
36%
DOCUMENT READY
If the fax already displays DOCUMENT READY before you set a
document, a small-sized document, such as a STMT-size document, may
have remained in the ADF from a previous fax or copy job. In such a
case, remove the small-sized document from the ADF and then set your
document.
Adjusting the Scanning Settings
Canon’s original Ultra High Quality (UHQ) imaging technology allows
you to send documents that are very close to the quality of the original
document. For best results, adjust the settings for special documents
before sending.
Follow these guidelines to change a setting:
❏ The lighted indicator tells you the current setting.
❏ Press the appropriate button repeatedly to light the setting you want.
❏ For documents that require special settings, you can set the Program
button to perform the settings with a single button press. (➞12-5)