Filter
Top Products
39
40
Send
Functions
Other Useful
Features
Copying
Functions
Additional
Functions
Preface
Additional Functions
Additional Functions
Copy Settings
Standard Settings
To Set the Send Screen as the Initial Function
Common Settings
Reference Guide Chapter 3
To Turn Off the Audible Tones
You can set on or off about enter tone and error
tone ect. Also, you can control the volume of audible
tones.
Reference Guide Chapter 3
To Enter Values in Inches
Enables you to enter values in inches on screens
in which millimeter units are used. Ensures that the
key for entering values in inches is displayed on the
various numeric entry screens, as in the screen shot
on the right. Press [Inch] to enter values in inches.
Reference Guide Chapter 3
* The numbers in the illustrations refer to operation steps.
Initial Function
Job Duration Display
Inch Entry
To Change the Display Language
Enables you to select the language displayed on the
touch panel display.
Reference Guide Chapter 3
Language Switch
Common Settings
Enables you to specify the screen that is displayed
when you turn ON the main power, or when Auto
Clear initiates. You can also set the Auto Clear
mode.
* The numbers in the illustrations refer to operation steps.
To Change the Initial Settings for the Copy
Function
Copying Guide Chapter 4
Enables you to change the Standard Settings to suit
your needs, or restore them to their default settings.
The Standard Settings refers to a combination of copy
modes that the machine automatically returns after the
power is turned ON, or when is pressed.
To Reverse the Contrast of Display
Enables you to reverse the contrast on the touch panel
display for better viewing. The Reversed Display mode
reverses the light and dark areas on the touch panel
display. If you find it hard to read what is being shown
on the touch panel display, try using this mode.
Reference Guide Chapter 3
Reversed Display (B/W)
2
3
1
1
2
1
2
1
2
1
2