Canon 7365 Projector User Manual


  Open as PDF
of 83
 
32
❼
Turning off the Projector
To turn off the projector:
3. Projecting an Image (Basic Operation)
MENU
BACK
KEYSTONE
WARNING
P
O
W
E
R
AUTO PC
INPUT
VOL
-
VOL
+
LAMP
POWER
INPUTIMAGE
ASPECT
INFO.
MENU
NO
SHO
W
AUTO PC
1.PressthePOWERbuttonontheprojectorcabinetor
theremotecontrol.The“PushPOWERbuttonagain
toturnoffpower.”messagewillappear.
WARNING
LAMP
WARNING
LAMP
WARNING
LAMP
Power On Fan running Standby
Steady
green light
Blinking
orange light
Steady
orange light
CAUTION:
Parts of the projector will become heated during opera-
tion. Use caution when picking up the projector immedi-
ately after it has been operating.
CAUTION:
• The projector cannot be turned off for 60 seconds
after the lamp is turned on and while the POWER
indicator is blinking green. Doing so could cause pre-
mature lamp failure.
• Do not turn off the AC power by pressing the main
power switch or by unplugging the power cord when
the projector is powered on. Doing so can cause
damage to the projector.
2.PresstheOKbuttonorpressthePOWERbutton
again.
 ThePOWERindicatorwillgloworange.Afterthepro
-
jectorturnsoff,thecoolingfanskeepoperatingfor
30seconds(Cooling-offtime).
 Immediatelyafterturningontheprojectoranddis
-
playinganimage,youcannotturnofftheprojector
for60seconds.
3.TurnofftheMainPowerswitch.Thepowerindicator
willgoout.
TIP: The main power of the projector can be turned off by pressing
the main power switch or by unplugging the power cord even
during the cool down period after the projector is turned off.
NOTE: Do not turn off the main power within 10 seconds of making
adjustment or setting changes and closing the menu.
Doing so can cause loss of adjustments and settings.
 previous next