Canon 7365 Projector User Manual


 
6
5. Using On-Screen Menu



When 16:9 is selected from
the source (i.e. DVD player),
the following selections will
display:



  




 




When 4:3 is selected from
the source (i.e. DVD play-
er), the following selections
will display:
Adjusting White Balance [White balance]
This allows you to adjust the white balance. Brightness for each color (RGB) is used to adjust the black level of the
screen; Contrast for each color (RGB) to adjust the white level of the screen.
Adjusting Brightness, Contrast, Sharpness, Color level and Color balance
You can adjust brightness, contrast, sharpness, color level and color balance.
Brightness ............. Adjusts the brightness level or the black level of the image.
Contrast ................. Adjusts the intensity of the image according to the incoming signal (White level of the image).
Sharpness .............. Controls the detail of the image for Video (not valid for RGB).
Color level ..............Increases or decreases the color saturation level (not valid for RGB).
Color balance ........ Varies the color level from +/- green to +/-blue. The red level is used as reference. This adjustment is
only valid for Video and Component inputs (not valid for RGB).
Reset
The settings and adjustments for [Image adjustment] will be returned to the factory settings with the exception of
the following; numbers and [Reference] within the [Image mode] screen.
The settings and adjustments under [Detail settings] within the [Image mode] screen that are not currently select-
ed will not be reset.
Menu Descriptions & Functions [Display settings]
Selecting Aspect Ratio [Aspect]
Aspect allows you to select the best Aspect mode to display your source image.
You can also display the Aspect menu by pressing the ASPECT button on the remote control.
True size (RGB only): Turns off the scaling feature. The projector displays the current image in its true resolution.