Filter
Top Products
To print the test prints, you must be automatically feeding a stack of
paper. The test prints are not available when you are manually feeding
paper.
Self Test
You can print the self test in both printer control modes: BJ-10 mode or
Epson LQ mode. The printer prints a repeating pattern of characters in
the default print mode and pitch.
In BJ-10 mode, the pattern is printed in Courier typeface at 10 cpi; the
print mode is HQ. In Epson LQ mode, the pattern is printed in Roman
typeface at 10 cpi; the print mode is HQ.
Starting
To start the self test, follow these steps:
1. Press the POWER button to turn off the printer
2. Press and hold the ON LINE and PRINT MODE buttons, and
press the POWER button until the beeper sounds once. The
printer starts to print the self test.
Stopping
To stop the self test, press and hold the ON LINE and PRINT MODE
buttons for one second. The printer stops printing, ejects the current
sheet of paper, and goes back on-line.
In BJ-10 mode, the self test looks like this: