Filter
Top Products
DIP Switch Settings
The DIP switch settings control various printer functions, such as the
page length and character set you want to use. The printer functions
defined by the DIP switches are determined by the printer control mode.
DIP switch 11 selects the printer control mode. When DIP switch 11 is
OFF, the printer is in BJ-10 mode. When DIP switch 11 is ON, the
printer is in Epson LQ mode.
BJ-10 Mode
When the printer is in BJ-10 mode (DIP switch 11 is OFF), you can set
the DIP switches to control the following functions:
Horizontal margins Left margin = 0
Right margin = maximum print width
Print direction (text) Bi-directional
Font typeface Courier
Horizontal print position Letter
Text scale mode Disabled
Envelope mode Disabled
Reduction mode Disabled
Page length 11 inches
Character set Character Set 1
Automatic line feed (LF) Disabled (no automatic LF after CR)
Alternate Graphics Mode Disabled
Code page 437 (IBM USA)
Buffer Input = Approx. 50.4 KB
Download = 0 KB
Printer control mode BJ-10
Automatic emulation switching mode Disabled
NOTE: This printer has two printer control modes: BJ-10 mode,
which emulates the IBM Proprinter X24E, and Epson LQ mode, which
emulates the Epson LQ-510. The default setting is BJ-10 mode. If you
change this to Epson LQ mode, the default settings also change.