Filter
Top Products
Smoothing mode Disabled
Reduction mode Disabled
Alternate Graphics Mode Disabled
Automatic emulation switching mode Disabled
The default setting is BJ-10 mode. If you change this to Epson LQ mode, the default
settings also change.
DIP Switch Settings
The DIP switch settings control various printer functions, such as the page length
and character set you want to use. The printer functions defined by the DIP
switches are determined by the printer control mode. The printer has two control
modes:
§ BJ-10 mode, which emulates the IBM Proprinter X24E
§ Epson LQ mode, which emulates the Epson LQ printers
DIP switch 11 selects the printer control mode. When DIP switch 11 is OFF, the
printer is in BJ mode (this is the default). When DIP switch 11 is ON, the printer
is in Epson LQ mode.
BJ-10 Mode
When the printer is in BJ-10 mode (DIP switch 11 is OFF), you can set the DIP
switches to control the following functions:
DIP switch Function OFF ON
1 Horizontal print
position
Letter size or
envelope
A4 size
2 Text scale mode Disabled Enabled
3 Page length 11 inches Disabled
4 Character set Set 1 Set 2
5, 6, 7 Code page See following descriptions
8 Automatic carriage return (CR) Line feed (LF only) LF with CR
9 Alternate Graphics Mode (AGM) Disabled Enabled
10 Buffer size
Input: 62 KB
Download: 0 KB
Input: 21 KB
Download: 41 KB
11 Printer control mode BJ-10 mode Epson LQ mode
12 Automatic emulation switching Disabled Enabled
DIP switch 1DIP switch 1
Use this switch to change the horizontal print position according to the size of
your paper. If you are using letter-size paper or COM 10 envelopes, set this
switch OFF; the left margin will be 0.25 inch (6.4). If you are using A4-size paper
or DL-size envelopes, set this switch ON; the left margin will be 0.13 inch (3.4
mm).
DIP switch 2DIP switch 2
If you are using a software application that assumes 66 lines will fit on each page,
set this switch to ON. The printer will reduce the line spacing by a factor of 14/15,
which is from 62 lines per page to 66 lines per page if line spacing is set to 6 lines
per inch (lpi).
DIP switch 3DIP switch 3
If you are using letter-size paper, set this switch OFF; this sets the page length to