Canon C4580 Printer User Manual


 
Setting Up a Computer for Printing/Sending a Fax
3-57
3
Using a TCP/IP Network
Printer Connection Method (WSD)
The following procedure describes how to perform printing with WSD when using
Windows Vista.
If a dialog box is displayed while you are performing this procedure, enter a user
name and password. For more information, see the documentation provided with
Windows Vista.
IMPORTANT
IPv6 is not supported.
1
Check the settings for <RX/Print Range> in [IP Address Range
Settings] on the IPv4 Settings screen to see whether the IPv4
address of the computer in which a driver is to be installed is
permitted. For details, see step 17 in "TCP/IP Settings (IPv4),"
on p. 3-3.
IMPORTANT
If the settings for <RX/Print Range> in [IP Address Range Settings] on the IPv4
Settings screen do not permit the IPv4 address, you cannot install a driver.
If the IPv4 address of the computer is beyond the range of the permitted IPv4
addresses set for <RX/Print Range> after installing a driver, you cannot print or
send a fax from the computer.
2
Install the driver.
Using Windows Explorer
With Windows Explorer, right-click the printer icon you want to use select
[Install].
Using the Add Printer Wizard
Start the Add Printer Wizard select a network printer.