Filter
Top Products
3
Click OK to
print the
Nozzle
Check
Pattern.
o Check the results of the Nozzle Check Patter. See the sample
printout on page 4-6.
o If any portion of the Nozzle Check Pattern is incorrect, clean the
print head. See page 4-7 for details.
Printing the Nozzle Check Pattern Using the Operators Panel
1
Load paper. o Load one sheet of letter-size plain paper in the auto sheet feeder.
o Do not use a paper size other than letter or A4.
2
Turn the
printer off
and back on.
o Turn off the printer and wait a few seconds.
o Press down and hold the POWER button. The printer will beep
once. Continue to hold down the POWER button until you hear
one further beep then release the POWER button. The test print
begins.
o Check the results of the Nozzle Check Pattern. See the sample
printout on page 4-6.
o If any portion of the Nozzle Check Pattern is incorrect, clean the
print head. See page 4-7 for details.