Filter
Top Products
2
Follow the
instructions
on the
screen.
o A message appears to warn you NOT to start another operation
until deep print head cleaning is finished. Click the OK button.
o The POWER light flashes during print head deep cleaning and then
lights again when deep cleaning is complete.
o To check the print heads, print the Nozzle Check Pattern (see page
4-4).
If the results of the Nozzle Check Pattern are not satisfactory, repeat these four
steps in the following order until the pattern is satisfactory:
1. Clean the print head.
2. Print the Nozzle Check Pattern.
3. Deep clean the print head.
4. Print the Nozzle Check Pattern.
Deep Cleaning Using the RESUME Button
Make sure the printer is on.
o Press and hold down the RESUME button until the printer beeps twice
and then release it.
o The POWER light blinks during print head deep cleaning and then stays
on when deep cleaning is finished.