Filter
Top Products
Photo 39
N
eed help with a particular remanu-
facturing problem?
Call the Technical Resource Center from
8am - 5pm PST: 800 394.9900
WX Technical Instructions 9
Photo 38
Step 39
Put a little fresh toner on the doctor blade
and reinstall.
(See Photo 39)
S
tep 38
Reinstall the toner paddle bar felts and
the bar gears that hold them in. Then
i
nstall toner sensor bar.
(
See Photo 38)
Photo 40
Step 40
Place the mag roller bushing, mag roller
bearing,and the mag roller stabilizer back
on the mag roller. Install mag roller back
onto toner hopper.
(See Photo 40)
P
hot
o 41
Step 41
Reinstall all the gears on the toner hop-
per.
(See Photo 41)
Photo 42
St
ep 42
Now install the gear side end cap, align-
ing the “flat sided shaft” of the magnet
with its “D” shaped hole and the position-
ing pins thr
ough the mag r
oller stabiliz
er
holes and then pr
ess do
wn.
Install t
w
o
Phillips head screws. Align the metal bias
str
ap t
o the plastic pin next to the doctor
blade and pr
ess in
t
o p
osition so tha
t it
contacts the doctor blade.
(S
ee P
hot
o 42)
Notes