Filter
Top Products
1
2
3
Installing the Battery
Charging the Battery
29
Using the Battery Pack
Use the battery pack NB-CP2L (sold separately) for printing images in places without a power outlet.
With a fully charged battery, you can print approximately 36 sheets* of Postcard size paper.
* The number of possible prints is based on Canon testing standards, and may change depending on printing
conditions.
Remove the battery terminal cover.
Plug in SELPHY (p. 10).
Charging starts and appears on the screen.
Charging completes after approximately 4 hours. and
disappears.
If you press the
q
button while the battery is charging (p.
11), SELPHY can be used; however, charging will stop.
When you turn SELPHY off (p. 11), appears and
charging resumes.
For cautions concerning the battery, refer to the user guide included with the battery.
When
is displayed and you press any button other than the
q
button for 3 seconds or
longer,
will disappear. When the screen is turned off while the battery is charging and you
press any button other than the
q
button,
will appear after approximately 10 seconds.
If SELPHY is not used for more than ve minutes, it will automatically turn off to save power.
If a red
appears, the battery has reached the end of its life span. Purchase a new battery.
Remove the battery cover.
Slide and hold the cover lock (
), then remove the cover
towards (
).
Attach the battery.
Insert the tab (
), then push the battery (
) until it clicks
and locks into place.
Air Vents
C OPY