Filter
Top Products
3
4
9
Use only dedicated paper for use in SELPHY CP series printers included in the genuine Canon brand
Color Ink Cassette/Paper Sets. Regular printing paper, regular postcards, or dedicated paper for SELPHY
ES series printers cannot be used.
Never do the following, as it may result in failure or cause the printer to malfunction:
reverse the paper (the shiny side is the print side)
bend or separate the paper at the perforations before printing
use label sheets that have begun to peel or label sheets with portions peeled back
write on a sheet before printing
print
on already printed paper
reuse a spent ink cassette
Do not touch the springs of the paper cassette.
If the springs are bent or deformed, paper will not feed correctly into
SELPHY.
Do not touch or scratch the print surface (shiny side), or touch the
paper with wet hands. If the print surface becomes dirty or wet, you
will not be able to make clean prints.
-
-
-
-
-
-
Set the paper.
Set the paper into the paper cassette that you prepared.
You can place up to 18 sheets in the paper cassette.
Inserting 19 or more sheets may damage the printer or
cause malfunction.
Hold the paper as shown in the illustration, with the shiny
side facing up and put it into the paper cassette. Do not
touch the print side (shiny side) of the paper with your
ngers. This may prevent you from making clean prints.
If a protective sheet is included with the paper, remove it
and
set the paper only into the cassette.
When making Postcard size prints that have a section
for pasting a stamp, insert the paper so that the stamp
section is facing the direction shown in the illustration.
Close the lid.
Close the inner lid until it clicks into place.
Leave the outer lid open during printing.
Shiny side
Spring
C OPY