Filter
Top Products
4-7
Canceling memory sending
■ To cancel memory sending while documents are being scanned using the ADF
■ To cancel memory sending after all documents have been scanned
Canceling Sending
Sending Faxes
4
❚ While documents are being sent:
1
Press Stop/Reset.
• The machine asks you to confirm that you want to
cancel.
2
Press 4 (–) to cancel sending.
• If you change your mind and want to continue
sending, press e (+).
• The machine prints an ERROR TX REPORT.
(→ p. 7-3)
❚ While documents are waiting to be
sent:
• You can operate Fax Monitor or Delete
when the Function key is lit. If the
Function key is not lit, press it. However,
you do not need to press Function in step
1 to execute the Fax Monitor function if
FAX MONITOR is programmed in
PROGRAM 1-TOUCH KEY. (→ p. 9-4)
1
Press Function.
2
Press Fax Monitor.
3
Use 4 (–) or e (+) to select TX
RESERVE STATUS.
4
Press Set.
Ex:
5
Use 4 (–) or e (+) to select the document
to be canceled by checking the reservation
number and the fax number.
6
Press Delete.
• The machine asks you to confirm that you want to
delete the document.
7
Press 4 (–) to cancel sending.
• If you change your mind and want to continue
sending, press e (+).
Ex:
• You can also cancel sending in Memory
Reference. (→ p. 4-16)
NOTE
TX/RX NO. 0013
ERASING END
OK TO DELETE?
< YES NO >
--:-- 0013 TX STNDBY
905795 1111
FAX MONITOR
2.TX RESERVE STATUS
NOTE
CANCEL DURING TX/RX?
< YES NO >
1
Press Stop/Reset.
• Scanning is canceled.