Filter
Top Products
5-6
In Manual mode, if you connect a telephone to your machine, you can receive voice calls as well as manually
activate reception of faxes. You can activate reception from the machine or from the telephone connected to the
machine (this is called Remote receiving).
• For this mode, you need to connect a telephone to your machine. (→ p. 1-4)
• Make sure there are no documents in the ADF.
• Make sure the REMOTE RX setting is enabled. (→ p. 9-7)
• If your telephone line uses rotary pulse and the telephone connected to the machine cannot be switched
to tone dialing, you cannot activate Remote receiving.
NOTE
Receiving Faxes Manually
1
Make sure Manual is displayed in the
LCD.
Ex:
• To set Manual, → p. 5-2.
2
Make sure you have connected a telephone
to the machine.
3
When you hear the telephone ring, pick up
the handset.
4 ❚ If you hear a person’s voice:
Start your conversation. If the caller wants to send a
fax after talking to you, ask them to press the start
key on their fax machine.
When you hear a slow beep, press Start on your
machine to begin receiving the fax. Hang up the
handset.
❚ If you hear a slow beep tone or silence:
Someone is trying to send you a fax.
If the telephone is close to your machine, press Start
on the machine to begin receiving the fax. Hang up
the handset.
• If no paper is loaded in the cassette, the
LCD displays RECEIVED IN MEMORY.
When paper is loaded, the machine
automatically resumes printing.
• The machine will beep and HANG UP
PHONE will be displayed if the handset is
not hung up properly. Make sure the
handset is seated properly in its cradle. If
you do not want the machine to beep,
disable the OFFHOOK ALARM setting. (→
p. 9-5)
• If the telephone is located away from your
machine, dial 25 (the remote receiving ID)
on your telephone and hang up. When your
telephone line uses rotary pulse, switch to
tone dialing on your telephone before
dialing 25 (the remote receiving ID).
• You can change the number for the remote
receiving ID, with a combination of two
characters using 0 to 9,
A and #, or disable
remote receiving. (→ p. 9-7)
• If you have an answering machine
connected to your machine that can carry
out remote-control operations (controlling
your answering machine from a remote
telephone), the security code for this
function may be the same as the remote
receiving ID. If so, make sure you change
the machine’s remote receiving ID to make
it distinct from the answering machine’s
security code. (→ p. 9-7)
NOTE
FAX 12/03/2001 15:30
Manual STANDARD