Filter
Top Products
7-2
The machine is factory-set to automatically print an ACTIVITY REPORT after every 20 transactions. If you want
to print an ACTIVITY REPORT before it is automatically printed, follow this procedure:
• If you prefer the machine not to print an ACTIVITY REPORT after every 20 transactions, set
ACTIVITY REPORT to OFF. (→ p. 9-5)
• You do not need to press Function in step 1 to execute the Report function if REPORT is programmed
in PROGRAM 1-TOUCH KEY. (→ p. 9-4)
Transactions in an ACTIVITY REPORT are listed chronologically.
A12/03 15:10 905 795 1111 5001 AUTO RX ECM 1 OK 00
,
33
A12/03 15:14 905 795 1111 5002 AUTO RX ECM 1 OK 00
,
24
A12/03 15:22 Canon TOKYO 03 3758 2111 0001 SEQ. B
,
CAST ECM 3 OK 01
,
18
A12/03 15:24 Canon AUSTRALIA 2 887 0166 0001 SEQ. B
,
CAST ECM 3 OK 01
,
18
A12/03 16:10 905 795 1111 5003 AUTO RX ECM 1 OK 00
,
18
A12/03 16:16 2 887 0166 5004 AUTO RX ECM 4 OK 00
,
59
A12/03 16:27 Canon EUROPE 20 545 8545 0002 TRANSMIT ECM 1 OK 01
,
20
A12/03 16:30 Canon EUROPE 20 545 8545 0003 TRANSMIT ECM 1 OK 04
,
12
12/03 16:53 03 3758 2111 5005 AUTO RX ECM 1 OK 01
,
16
12/03 17:08 Canon AUSTRALIA 2 887 0166 0004 TRANSMIT 3 NG 00
,
51
12/03 17:20 CANON OPTICS 1 432 2060 0005 TRANSMIT 0 NG 00
,
01
*****************************
*****************************
*** ***
ACTIVITY REPORT
12/03/2001 17:28 FAX 123 4567 CANON 001
3 STOP
0 #0018
ST. TIME DESTINATION TEL/ID NO. MODE PGS. RESULT
TRANSACTION (TX/RX) NUMBER
TRANSACTION MODE
INDICATES AN
ENTRY THAT HAS
APPEARED ON A
PREVIOUS REPORT.
ERROR PAGE*
ERROR CODE (→ p. 8-2)
Stop/Reset WAS PRESSED DURING TRANSACTION
TRANSACTION DURATION
* The number of pages that have been printed and the number of pages indicated
on the report may not be the same.
ERROR CORRECTION MODE TRANSACTION
NOTE
ACTIVITY REPORT
1
Press Function.
2
Press Report.
3
Use 4 (–) or e (+) to select
1.ACTIVITY REPORT.
4
Press Set.
• The machine prints an ACTIVITY REPORT and
returns to standby mode.
REPORT
1.ACTIVITY REPORT