Filter
Top Products
94
1
2
3
4
5
Introduction
Contents at
a Glance
Basic
Operation
Advanced
Operation
Advanced
Image Editing
and Printing
Editing
JPEG/TIFF
Images
Index
Processing
Large Numbers
of Images
Reference
O The trimmed range can be reverted to its original condition at
any time
A trimmed image is displayed or printed as a trimmed image.
However, since the image is not actually trimmed, you can always
revert to the original image by clicking the [Reset] button in the
trimming window or performing the “Re-Editing an Image” procedure
(p.100).
O Display of the trimmed image in each window
• Main window: The frame showing the trimming range is
displayed on the image (p.106).
• Edit window: The image is displayed in its trimmed condition.
• Edit image window: The thumbnail image is the same as the main
window display, and the enlarged image is the
same as the edit window display.
O Printing a trimmed image
You can print as a trimmed image by printing it in DPP.
O The image becomes a trimmed image when saved as a separate
image
The trimmed JPEG or TIFF image actually becomes a trimmed image
when saved as a separate image (p.100).
O Images that have aspect ratio set will be displayed as trimmed
images
When aspect ratio information is attached to an image shot with EOS-
1Ds Mark III or EOS-1D Mark III, the set trimming range based on the
aspect ratio information is displayed. However, since the image is not
actually trimmed, you can change the trimming range or revert to the
condition before trimming.
When reverting to the condition before trimming is performed based
on the aspect ratio information at the time of shooting, click the
[Reset] button. Also, if you want to cancel all the trimming range, click
the [Clear] button (p.113).
About trimmed images
O Switch between screens using the keyboard
You can also switch between full screen display/normal screen
display by pressing the < > + <F11> keys.
O Operate using the menu
Each operation can also be performed with the menu which appears
by clicking on the image while holding down the <control> key.
O Apply the trimmed range to another image
You can apply the trimmed range to another image by clicking the
[Copy] button to copy the trimmed range, displaying another image
and then clicking the [Paste] button.
To batch apply a copied trimming range to multiple images, select the
trimmed image and the multiple images to which you want to apply
the trimmed range in the main window, and display the trimming
window. With the trimmed image displayed, click the [Copy] button
and then click the [Apply All] button. This will apply the trimming range
to all the images selected when the trimming window is displayed.
Convenient functions of the trimming window
For a list of the trimming window functions, refer to p.113.
C OPY