Filter
Top Products
Chapter 2 Setting Up 2-19
Setting Up
Loading Paper in the Multi-Purpose Tray
Follow this procedure to load paper in the multi-purpose tray:
1 Make sure the paper thickness lever is set to
p (left).
• For details, → p. 5-6.
c
Do not set the paper thickness lever
while the unit is printing since this will
cause problems.
Ink
Cartridge
BCl-21
Color
Made in
Japan
Ink
Cartridge
BCl-21
Black
Made in
Japan
2
1
2
1
2 Raise the paper rest until it stops q, then
move the paper guide to the left to match the
size of your paper w.
3 Prepare a stack of paper by fanning the edge
that will feed into the unit first, and then by
tapping the stack on a flat surface to even its
edges.
4 Insert the stack into the multi-purpose tray q,
and align the right edge of the stack with the
right side of the multi-purpose tray. Slide the
paper guide snugly against the left edge of
the stack w.
• The multi-purpose tray holds up to 100 sheets of
75 g/m
2
plain paper.
• Make sure the stack does not exceed the paper
limit mark (P).
The unit is now ready to print.
Paper Limit Mark