Filter
Top Products
6 times
Inner cover open. [1841]
*2
Close the inner cover, and press the
Resume/Cancel button.
Inner cover open during printing
on paper. [1846]
*2
Close the inner cover, and press the
Resume/Cancel button.
Inner cover open during printing
on paper (print continuable).
[1851]
*1
Close the inner cover, and press the
Resume/Cancel button.
Inner cover open during printing
on paper (print NOT continuable).
[1856]
*1
Close the inner cover, and press the
Resume/Cancel button to clear the error.
The paper being printed at error occurrence
will be ejected without printing the
remaining data for the ejected paper, then
printing will resume from the next page.
Inner cover closed during CD /
DVD printing (print continuable).
[1850]
*1
Open the inner cover which functions as the
CD / DVD tray feeder, set the CD / DVD
tray in the feeder, and press the
Resume/Cancel button.
Inner cover closed during CD /
DVD printing (print NOT
continuable). [1855]
*1
Open the inner cover, and press the
Resume/Cancel button to clear the error.
The CD or DVD being printed at error
occurrence will be ejected without printing
the remaining data for the ejected CD or
DVD, then the next print job will be done.
7 times
Multiple ink tanks of the same
color installed. [1681]
Replace the wrong ink tank(s) with the
correct one(s).
Ink tank in a wrong position.
[1680]
Install the ink tank(s) in the correct
position.
8 times
Warning: The waste ink absorber
becomes almost full. [1700]
Pressing the Resume/Cancel button will
exit the error, and enable printing.
The service call
error, indicating
the waste ink
absorber is full, is
likely to occur
soon.
9 times
The connected digital camera or
digital video camera does not
support Camera Direct Printing.
[2001]
Remove the cable between the camera and
the printer.
10 times Automatic duplex printing cannot
be performed. [1310]
Press the Resume/Cancel button to eject the
paper being used at error occurrence.
Printing will resume from on the front side
of the next page.
Data which was to
be printed on the
back side of paper
at error occurrence
is skipped (not
printed).
11 times
Failed in automatic print head
alignment. [2500]
Press the Resume/Cancel button.
- If paper is being fed at error occurrence,
the error is indicated after the paper is
ejected.
- If the error occurs, the print head
alignment values are not changed.
- After exit from the error by the
The error is
indicated when the
pattern is not
printed due to no
ink or non-ejection
of ink, or when the
sensor's AD value
1-6