Filter
Top Products
2-3. Warnings
Printer (no LED indications):
*1: If the warning is displayed, the carriage does not move to the ink tank replacement position when the access
cover is opened.
2-4. Troubleshooting by Symptom
Displayed warning Remarks
Low ink
Status indication only.
Print head temperature rise If the print head temperature is high when the access cover is opened,
the warning is displayed
*1
.
When the print head temperature falls, the warning is released.
Protection of excess rise of the print
head temperature
If the print head temperature exceeds the specified limit, a Wait is
inserted during printing,
Symptom Solution Remarks
Faulty operation
The power does not turn on.
The power turns off immediately
after power-on.
Replace the
- AC adapter, or
- logic board ass'y
*1
.
A strange noise occurs. Remove foreign material, or attach a
removed part if any.
Printing stops mid-way.
Replace the logic board ass'y
*1
.
Paper feed
problems
Multiple sheets feed.
Replace the
- sheet feed unit, or
- cassette.
Paper does not feed. Remove foreign material, or replace
the
- sheet feed unit, or
- cassette.
Paper feeds at an angle. Remove foreign material, adjust the
paper guide, or replace the
- sheet feed unit, or
- cassette.
No printing, or no color ejected. Replace the
- ink tank,
1-9