Filter
Top Products
1. MAINTENANCE
1-1. Adjustment, Periodic Maintenance, Periodic Replacement Parts, and
Replacement Consumables by Service Engineer
(1) Adjustment
Adjustment Timing Purpose Tool
Approx.
time
Destination
settings
(EEPROM
settings)
At logic board replacement To set the destination.
None.
Perform in the
service mode.
1 min.
Waste ink
counter
resetting
(EEPROM
settings)
- At logic board replacement
- At waste ink absorber
replacement
To reset the waste ink counter.
None.
Perform in the
service mode.
1 min.
Paper feed
motor position
adjustment
At paper feed motor
replacement
To adjust the belt tension.
(Position the paper feed motor so
that the belt is stretched tight.)
None.
5 min.
CD / DVD
detection sensor
light volume
correction
*1
- At logic board replacement
- At carriage unit replacement
To correct the light volume for
the CD / DVD detection sensor.
None.
Perform in the
service mode.
2 min.
Grease
application
- At carriage unit replacement
- At PR shaft ass'y replacement
- At CL base / gear replacement
- To maintain sliding properties
of the carriage shaft and the lift
cam shaft.
- To protect the printer's sliding
portions (gears).
FLOIL KG-107A 1 min.
Ink system
function check
- At logic board replacement
- At platen unit replacement
- At carriage unit replacement
To maintain detection
functionality for presence of the
ink tanks and each ink tank
position.
None.
Perform in the
service mode.
1 min.
1-1