Filter
Top Products
26
6
Set the paper cassette in the printer at an angle as shown in
the figure
a, then push it into the printer or paper feeder
gently and horizontally
b.
Push the paper cassette into the printer firmly until the front side of the paper
cassette is flush with the front surface of the printer.
CAUTION
When setting the paper cassette in the printer, be careful not to catch your
fingers.
When Loading Custom Size Paper
Perform the following procedure to load custom size paper.
IMPORTANT
•
You can load paper of the following custom paper sizes.
- When loading paper in portrait orientation: Width 210.0 to 297.0 mm; Length 210.0 to
431.8 mm*
* When loading paper that is 279.5 to 297.0 mm wide in Cassette 1, the paper length
should be 210.0 to 420.0 mm.
- When loading paper in landscape orientation (only when LIPS LX Printer Driver is
used): Width 210.0 to 297.0 mm; Length 148.0 to 297.0 mm
•
When custom size paper is loaded, specify the setting for <
> as follows.
Cassette 1 Cassette 2
b
a
b
a