Canon LBP-2710 Printer User Manual


 
2
Turning the Printer On/Off
Tur ning the printer’s power on and off is performed with the power switch on the
right side of the printer. Please learn the correct procedures to avoid any
unexpected trouble.
Turning On the Printer
To use the printer, turn it on by pressing the power switch to the “I” position. Printing
is enabled after the printer performs a self-diagnostic test to check the status of the
printer and any options installed.
IMPORTANT
Do not turn on the printer again immediately after turning off the power. Turn on the
printer after at least 3 seconds have passed since turning off the power.
NOTE
It may take time to bring the printer online when the power is turned on for the first time
after installing the hard disk, or when there are errors found on the hard disk, as the hard
disk is formatted after the power is turned on. (LBP-2810 only)
1
Press the power switch to the “I” position.
The indicators and the LCD display on the control panel are turned on. Then, the
printer performs a self-diagnostic test to check the status of the printer and any
options installed.