Canon LBP-2710 Printer User Manual


 
73
Cause:
The cartridge for the color indicated
on the display is out of toner.
Remedy:
Replace the toner cartridge with a
new one.
Cause:
There is a problem with the cartridge
of the color displayed.
Remedy:
Replace the toner cartridge with a
new one.
<Error skip>
Cause:
The paper specified cannot be
duplex printed.
Remedy:
Select the paper source on the
printer with standard-size paper
loaded, and set the paper size
setting on the PC to standard- size.
Then start printing again.
Cause:
The paper type specified cannot be
printed.
Remedy:
Press [
] and the paper will
be printed as plain paper. If the
paper is not plain paper, the data
may not be printed properly.
<Error skip>
Cause:
An error occurred when data was
being transferred between a PC and
the printer.
Remedy:
Check the interface cable connection
and print the data again.
<Error skip>
Cause:
The sizes of the paper loaded in the
paper cassette and paper tray are
different to the paper size settings
specified on the PC or the control
panel.
Remedy:
When paper is being fed from the
paper cassette, make sure that the
size of the paper loaded in the paper
cassette is the same as the paper
size settings for the paper cassette.
Also when paper is being fed from
the paper tray, make sure that the
size of the paper loaded in the paper
tray is the same as the paper size
settings for the paper tray before you
press [
].
Message
Cause and Remedy