Canon LBP-2710 Printer User Manual


 
26
2
Tap the stack of paper on a flat surface to properly align the edges.
IMPORTANT
Be sure to load a stack of transparencies or labels after thoroughly fanning them.
Otherwise, they may overlap when they are fed into the printer, causing paper jams.
When fanning or aligning transparencies, always hold the edges, where possible,
to avoid touching the print side.
Take care not to mark/stain the print side of transparencies with fingerprints, dust
or oil as this may cause a deterioration in print quality.
If the leading edge of the paper is bent or curled, straighten out the paper before
loading it into the tray.
If you are using paper that has been cut badly, sheets may overlap when delivered.
If you are using such paper, fan the stack of paper well, and then load it into the
cassette.
3
Insert the paper gently as far as it will go into the printer, with
the print side face down.
Load label sheets, B5-, A5, Executive-, and custom-size, in the portrait
orientation.
IMPORTANT
You can load up to 100 sheets of plain paper (64 g/m
2
) into the paper tray. Make
sure that the stack is not higher than the limit guide.
Do not load paper at an angle.
Limit Mark