Filter
Top Products
4
If the Printer is Not Using a Hard Disk
If the hard disk has not been installed in the printer, turn off the power as described
in the following procedure.
1
Make sure that the
indicator is off.
2
Press the power switch to the “
” position.
If the Printer is Using a Hard Disk (LBP-2810 only)
If the hard disk has been installed in the printer, turn off the power as described in
the following procedure.
IMPORTANT
•
If you attempt to shut down the printer when the paused job data or the secure job data
still remains in the hard disk, the message
appears. Once the shut down procedure has been selected, all jobs are
erased. However, the job data in the box is left on the hard disk. To resume printing, press
, and go online.
•
Once the shut down procedure has been selected, you cannot cancel the operation. If
you need to turn the printer on again, first turn off the power by following the instructions
on the control panel and then turn the printer on again.