Filter
Top Products
29
Press the P-TIMER button on the remote
control unit to operate the Count up/Count
down function. Refer to p.57 for detail of
Setting for the P-timer function.
To stop the count time, press the P-TIMER
button.
To restart the P-timer, press the P-TIMER
button again.
To cancel the P-timer function, press and hold
the P-TIMER button.
Press the IMAGE button on the remote control
unit to select a desired image mode of the
screen. See pages 35, 44 for details.
disappears after 4 seconds.
See the previous page for the description of
other buttons.
Select the screen size (See pages 37-40,
47-50 for details).
black out→ the captured image → normal
→
• • • • •
Press the BLANK button on the remote
control unit to black out the image. To restore
to normal, press the BLANK button again or
press any button. When the projected image
is captured and is set as User in the Logo
selection (p. 53), the screen changes each time
you press the BLANK button as follows.
When use the MUTE button to release the Blank
function, the mute function can not be operated at
the same time.
LV-RC06