Canon LV7297A Projector User Manual


 
31




This projector automatically tunes to various types of computers with its Multi-scan system and Auto
PC Adjustment. If a computer is selected as a signal source, this projector automatically detects the
signal format and tunes to project a proper image without any additional settings. (Signal formats
provided in this projector are shown on pages 76-77.)
One of the following messages may appear when:
When the projector cannot recognize
the connected signal conforming to
the provided PC systems,  is
displayed on the System Menu box
and the Auto PC Adjustment function
works to display proper images. If
the image is not projected properly,
a manual adjustment is required (pp.
33-34).
There is no signal input from the
computer. Check the connection
between your computer and the
projector. (See “Troubleshooting” on
p. 71.)


The preset system is manually
adjusted in the PC adjust Menu. The
adjusted data can be stored in 
 (pp. 33-34).

PC Systems provided in this projector
is chosen. The projector chooses
a proper system provided in the
projector and displays it.

* and  are examples.
1
2
PC system can also be selected manually.
Selecting Computer System Manually
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼ buttons
to select  and then press the Point or
the OK button.
Use the Point ▲▼ buttons to select 
and then press the Point or the OK button.
Use the Point ▲▼ buttons to select the
desired system and then press the OK
button.
3
Selected system in
the PC System Menu
is displayed.
Systems in this dialog box
can be selected.
Customized 
 set in the PC
adjust Menu (pp.
33-34).