Filter
Top Products
48
This function is used to adjust keystone
distortion of the projected image. Use the Point
▲▼ buttons to choose the item you want to
adjust.
To correct keystone distortion, press the OK
button.
Keystone appears on the screen. Use the
Point ▲▼ buttons to correct keystone
distortion (p. 26).
To store or reset the keystone correction,
press the Point ► button.
.......... Keep the keystone correction
even when the AC power cord
is plugged out or turned off the
projector.
Reset .......... Release the keystone correction
when the AC power cord is
plugged out.
Ceiling
Rear
When this function is set to On, the picture
will be top/bottom and left/right reversed. This
function is used to project the image from a
ceiling-mounted projector.
Ceiling
When this function is set to On, the picture will
be left/right reversed. This function is used to
project the image from rear of the screen.
Rear
To reset the adjusted data, select Reset and
press the
OK button. A confirmation box appears and then
select Yes. All adjustments will return to their
previous figures.
Reset
Press the OK button.