Filter
Top Products
VIDEO IN
Y –– Pb / Cb –– Pr / Cr
RGB IN
RESET
COMPUTER
AUDIO IN
AV AUDIO IN
AUDIO OUT
S–VIDEO IN
CONTROL
11
CONNECTING THE PROJECTOR
TERMINALS OF THE PROJECTOR
Connect the S-VIDEO
output from your
video equipment to
this jack.
(Refer to P13.)
Connect the audio output
(stereo) from the
computer to this jack.
(Refer to P12.)
Connect the audio output
from your video
equipment to this jack.
(Refer to P13.)
COMPUTER AUDIO
INPUT JACK
AUDIO INPUT JACK
VIDEO INPUT JACKS
S-VIDEO INPUT JACK
Connect the composite video
output from your video
equipment to VIDEO/Y jack
or connect the component
video outputs to VIDEO/Y,
Pb/Cb and Pr/Cr jacks.
(Refer to P13.)
This projector has input and output terminals on its side for connecting computer and video equipment. Refer to figures on
pages 11 to 13 for these connections.
Connect an external
audio amplifier to this
jack.
(Refer to P12, 13.)
AUDIO OUTPUT JACK
The projector uses a micro
processor for control and
occasionally, need to be reset.
This can be done by pressing
the RESET button with a pen,
which will shut down and
restart the unit. Do not use
the RESET function
excessively.
RESET BUTTON
When controlling a computer
with the optional Wireless
Remote Control Unit, connect
the mouse port of the
computer to this connector.
The Remote Control Unit
supplied with the projector can
not control a computer.
Consult your dealer for details.
(Refer to P12.)
CONTROL PORT CONNECTOR
Connect the computer
output to this jack.
(Refer to P12.)
RGB INPUT
TERMINAL (ANALOG)
When controlling a computer
with the optional Wireless
Remote Control Unit, connect
the USB port of the computer to
this connector. The Remote
Control Unit supplied with the
projector can not control a
computer. Consult your dealer
for details. (Refer to P12.)
USB CONNECTOR (Series B)
Downloaded from www.Manualslib.com manuals search engine