Filter
Top Products
2121
Using the Scan to E-Mail Feature
Using the Scan to E-Mail Feature
4. Set up the E-Mail Send feature.
① SMTP server:
Enter the SMTP server address you conrmed in “Checking the Information Required for
the Scan to E-Mail Feature,” ( P. 9).
② E-mail address:
If you have the e-mail address for this machine, enter it. You can also leave this eld
blank.
SMTP authentication:
The method in which the SMTP server checks the user name and password before sending e-mails. Many Internet
service providers use this method.
POP before SMTP:
The method in which the POP server checks the POP address and POP password before sending e-mails. If your
provider is using POP before SMTP as the authentication method, select [ON] for [POP Authentication before
Send] on the next screen.
To use this method, you need to make setting to receive e-mails using the POP protocol. For details, see “Setting
Up E-Mail,” ( P. 6-16) of Chapter 6, “Network,” in the Reference Guide.
What is it?