Filter
Top Products
7
Setting Up the Send Feature
Setting Up the Send Feature
This section describes the settings you need to make before using the Send feature on this machine.
Setting Up the Scan to E-Mail Feature
You need to make various settings to use the Scan to E-Mail feature. Use the ow chart below to
understand the setup procedure.
Checking the Information Required for the Scan to E-Mail Feature ( P. 9)
You check the information required for the Scan to E-mail feature.
Connecting a Network Cable ( P. 13)
You connect the machine to the network environment.
Setting the IP Address ( P. 14)
You make sure the correct IP address is set.
Starting the Remote UI ( P. 16)
Using the Remote UI, you set up the machine.
Setting up and Using the Scan to E-Mail Feature ( P. 18)
You set up and test the Scan to E-mail feature.
The setup is completed.
The Remote UI allows you to remotely make various settings of the machine using a web browser software such
as Microsoft Internet Explore. Using the Remote UI, you can make settings more easily and quickly than using the
operation panel on this machine.