Filter
Top Products
2222
Using the Scan to E-Mail Feature
Using the Scan to E-Mail Feature
5. Specify an authentication method.
When the SMTP authentication is used
①
SMTP Authentication(SMTP AUTH):
Select [ON].
② User name:
Enter the SMTP server address you conrmed in “Checking the
Information Required for the Scan to E-Mail Feature,” ( P. 9).
③ Password:
Enter the password that you conrmed in “Checking the
Information Required for Scan to E-Mail Feature,” ( P. 9).
6. Make sure the settings are correct, and then press [OK].
7. Turn o the main power switch of the machine. Wait for 10 seconds, and then turn on the
switch.
That completes the setting of the E-Mail Send feature.
Please proceed to “Registering E-Mail Addresses,” ( P. 23).
●